2013 Toyota Tacoma Leaf Helper Spring Parts

Base 2.7L L4 change vehicle

Choose your Drive Type for your 2013 Toyota Tacoma Base 2.7L L4

4WD RWD

Showing 1 - 10 of 10 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2013 Toyota Tacoma Leaf Helper Spring Hellwig

SPECIAL DESIGN HELPER SPRING KIT
2500 lbs. Capacity; Hammer Tone Powder Coat Finish; Simple Bolt On Installation Special Design Leaf Pack/Call For More Details~For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
LP-15 Helper Spring for 2005-2023 Toyota Tacoma 2wd/4wd
Special Design Helper Spring Kit
Product Attributes:
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Adjustable Length: Yes
Features:
- Enables Trucks To Carry Loads w/More Stability/Control
- Fast Easy Bolt On Installation
- Includes Heavy Duty Hardware
- Progressive Rate Leaves Do Not Affect Ride When Unloaded
- Set It/Forget It
- High Quality Spring Steel Leaves
- Adds New Life To Old Springs
- Zinc Plated Hardware/Brackets For High Quality Finish
- Long Life
- Limited Lifetime Warranty
Special design, 5 add-a-leaf helper spring kit. Designed for heavy tow/haul applications.

Additional Fitment Information:

Vehicle	Sub Model	Drive Type
2013 - Toyota Tacoma	Base	4WD

1 In Stock

$1,371.76 CAD

$1,646.11 CAD

Brand	Hellwig
Part #	1906
Condition	New
Warehouse	C

2013 Toyota Tacoma Leaf Helper Spring SuperSprings

Rear; Self-Adjusting Suspension Stabilizing System; Provides 800 lbs Additional Load Leveling Ability; Do Not Exceed GVWR Leaf Spring Dimensions 38L x 2.5W x 0.323~Mounts Directly On Axle
SuperSprings; Rear; Self-Adjusting Suspension Stabilizing System; Provides 800 lbs Additional Load Leveling Ability; Do Not Exceed GVWR;
SuperSprings
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Self Adjusting Suspension Stabilizing System
- Provides 800 Pounds Additional Load Leveling Ability
- Reduces Body Roll Up To 30 Pct Without Compromising Ride Quality
- Works In Conjunction w/Original Equipment Leaf Spring Assembly
- Adjustable Shackles Allow Installation To Suit Various Needs
- Typical Installation Completed In Approximately One Hour
- SAE 5160H 51 Pct Alloy/60 Pct Carbon High Grade Steel
- Shot Peened To Relieve Spring Stress And Extend Product Life
- Never Load Any Vehicle Beyond The Manufacturers GVWR
SuperSprings(R) are a unique and patented self-adjusting suspension stabilizing system for vehicles with rear leaf springs, designed to level loads and reduce body roll. SuperSprings(R) provide users extra load support and reduce body roll without compromising ride quality. They are manufactured using a variety of different sized springs to support multiple applications. All SuperSprings(R) are manufactured in the U.S.A. from SAE5160H high grade, shot peened steel.

Additional Fitment Information:

Vehicle	Sub Model	Drive Type
2013 - Toyota Tacoma	Base	RWD

Brand	SuperSprings
Part #	SSA1
Condition	New
Warehouse	C

2013 Toyota Tacoma Leaf Helper Spring SuperSprings

Rear; Self-Adjusting Suspension Stabilizing System; Provides 850 lbs Additional Load Leveling Ability; Do Not Exceed GVWR Leaf Spring Dimensions 40L x 2.5W x 0.360
SuperSprings; Rear; Self-Adjusting Suspension Stabilizing System; Provides 850 lbs Additional Load Leveling Ability; Do Not Exceed GVWR;
SuperSprings
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Self Adjusting Suspension Stabilizing System
- Provides 850 Pounds Additional Load Leveling Ability
- Reduces Body Roll Up To 30 Pct Without Compromising Ride Quality
- Works In Conjunction w/Original Equipment Leaf Spring Assembly
- Adjustable Shackles Allow Installation To Suit Various Needs
- Typical Installation Completed In Approximately One Hour
- SAE 5160H 51 Pct Alloy/60 Pct Carbon High Grade Steel
- Shot Peened To Relieve Spring Stress And Extend Product Life
- Never Load Any Vehicle Beyond The Manufacturers GVWR
SuperSprings(R) are a unique and patented self-adjusting suspension stabilizing system for vehicles with rear leaf springs, designed to level loads and reduce body roll. SuperSprings(R) provide users extra load support and reduce body roll without compromising ride quality. They are manufactured using a variety of different sized springs to support multiple applications. All SuperSprings(R) are manufactured in the U.S.A. from SAE5160H high grade, shot peened steel.

Additional Fitment Information:

Vehicle	Sub Model	Drive Type
2013 - Toyota Tacoma	Base	4WD

Brand	SuperSprings
Part #	SSA19
Condition	New
Warehouse	C

2013 Toyota Tacoma Leaf Helper Spring SuperSprings

Rear; Self-Adjusting Suspension Stabilizing System; Provides 800 lbs Additional Load Leveling Ability; Do Not Exceed GVWR Leaf Spring Dimensions 38L x 2.5W x 0.323~Mounts Directly On Axle
SuperSprings; Rear; Self-Adjusting Suspension Stabilizing System; Provides 800 lbs Additional Load Leveling Ability; Do Not Exceed GVWR;
SuperSprings
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Self Adjusting Suspension Stabilizing System
- Provides 800 Pounds Additional Load Leveling Ability
- Reduces Body Roll Up To 30 Pct Without Compromising Ride Quality
- Works In Conjunction w/Original Equipment Leaf Spring Assembly
- Adjustable Shackles Allow Installation To Suit Various Needs
- Typical Installation Completed In Approximately One Hour
- SAE 5160H 51 Pct Alloy/60 Pct Carbon High Grade Steel
- Shot Peened To Relieve Spring Stress And Extend Product Life
- Never Load Any Vehicle Beyond The Manufacturers GVWR
SuperSprings(R) are a unique and patented self-adjusting suspension stabilizing system for vehicles with rear leaf springs, designed to level loads and reduce body roll. SuperSprings(R) provide users extra load support and reduce body roll without compromising ride quality. They are manufactured using a variety of different sized springs to support multiple applications. All SuperSprings(R) are manufactured in the U.S.A. from SAE5160H high grade, shot peened steel.

Additional Fitment Information:

Vehicle	Sub Model	Drive Type
2013 - Toyota Tacoma	Base	RWD

Brand	SuperSprings
Part #	SSA1
Condition	New
Warehouse	C

2013 Toyota Tacoma Leaf Helper Spring SuperSprings

Rear; Self-Adjusting Suspension Stabilizing System; Provides 850 lbs Additional Load Leveling Ability; Do Not Exceed GVWR Leaf Spring Dimensions 40L x 2.5W x 0.360
SuperSprings; Rear; Self-Adjusting Suspension Stabilizing System; Provides 850 lbs Additional Load Leveling Ability; Do Not Exceed GVWR;
SuperSprings
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Self Adjusting Suspension Stabilizing System
- Provides 850 Pounds Additional Load Leveling Ability
- Reduces Body Roll Up To 30 Pct Without Compromising Ride Quality
- Works In Conjunction w/Original Equipment Leaf Spring Assembly
- Adjustable Shackles Allow Installation To Suit Various Needs
- Typical Installation Completed In Approximately One Hour
- SAE 5160H 51 Pct Alloy/60 Pct Carbon High Grade Steel
- Shot Peened To Relieve Spring Stress And Extend Product Life
- Never Load Any Vehicle Beyond The Manufacturers GVWR
SuperSprings(R) are a unique and patented self-adjusting suspension stabilizing system for vehicles with rear leaf springs, designed to level loads and reduce body roll. SuperSprings(R) provide users extra load support and reduce body roll without compromising ride quality. They are manufactured using a variety of different sized springs to support multiple applications. All SuperSprings(R) are manufactured in the U.S.A. from SAE5160H high grade, shot peened steel.

Additional Fitment Information:

Vehicle	Sub Model	Drive Type
2013 - Toyota Tacoma	Base	4WD

Brand	SuperSprings
Part #	SSA19
Condition	New
Warehouse	C

2013 Toyota Tacoma Leaf Helper Spring - Rear Tuff Country

2005-2022 Toyota Tacoma 4wd-Rear 2in. Long Add-a-Leafs Pair
2 in.; Includes Center Pins; Pair
2005-2023 Toyota Tacoma 4wd-Rear 2in. Long Add-a-Leafs Pair
Add-A-Leaf Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
Features:
- Mounts To Existing Leaf Springs
- Economical Method Of Lifting Vehicle w/Leaf Springs
- Increases Payload Capacity
- Center Pins Included
- Great For Vehicles w/Winches Or Snowplows
Tuff Country add-a-leafs are an economical solution to lifting vehicles with leaf springs. These add-a-leafs are designed to be added to existing stock leaf springs to give a small amount of additional height or lift to your vehicle and gain additional payload capacity.

Additional Fitment Information:

Vehicle	Position	Sub Model	Drive Type
2013 - Toyota Tacoma	Rear	Base	4WD

Brand	Tuff Country
Part #	T1C85255
Condition	New
Warehouse	B

2013 Toyota Tacoma Leaf Helper Spring - Rear Tuff Country

2005-2022 Toyota Tacoma 4wd-Rear 2in. Long Add-a-Leafs Pair
2 in.; Includes Center Pins; Pair
2005-2023 Toyota Tacoma 4wd-Rear 2in. Long Add-a-Leafs Pair
Add-A-Leaf Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
Features:
- Mounts To Existing Leaf Springs
- Economical Method Of Lifting Vehicle w/Leaf Springs
- Increases Payload Capacity
- Center Pins Included
- Great For Vehicles w/Winches Or Snowplows
Tuff Country add-a-leafs are an economical solution to lifting vehicles with leaf springs. These add-a-leafs are designed to be added to existing stock leaf springs to give a small amount of additional height or lift to your vehicle and gain additional payload capacity.

Additional Fitment Information:

Vehicle	Position	Sub Model	Drive Type
2013 - Toyota Tacoma	Rear	Base	4WD

Brand	Tuff Country
Part #	T1C85255
Condition	New
Warehouse	B

2013 Toyota Tacoma Leaf Helper Spring - Rear Skyjacker

ADD-A-LFS; 1.5-2IN. 05 TACOMA
Lift Height 2.5-3 in.; Single
ADD-A-LFS;1.5-2in. 05> TACOMA
Softride Add-A-Leaf
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
Softride(R) Add-a-leafs use only American steel and are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the leaf. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the leaf. The Skyjacker(R) add-a-leafs are pre-drilled for the center pin. Pin location varies with each application. Most have long tapered ends for a progressive affect and ride comfort.

Additional Fitment Information:

Vehicle	Position
2013 - Toyota Tacoma	Rear

Brand	Skyjacker
Part #	S97RTC515
Condition	New
Warehouse	B

2013 Toyota Tacoma Leaf Helper Spring Hellwig

Up To 500 lbs. Level Load Capacity For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
EZ-550 Helper Spring Kit for Various Truck Makes and Models. See Vehicle Fitment
EZ-550 Helper Spring Kit
Product Attributes:
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Adjustable Length: Yes
Features:
- Reduces Leaf Spring Wrap Up
- A Cost Effective Spring Solution
- Makes Your Heavy Load Driving Safer
- Simple Bolt On Installation
- High Quality Spring Steel Leaves
- Limited Lifetime Warranty
Hellwig's light-duty EZ-550 Helper Springs pack a lot of capability in every box. Packaged complete with the same heavy duty powder coated and plated components, hardware and installation instructions as our heavy duty helper spring products, these kits are designed for the vehicles that need lighter assistance in carrying a load. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. Ideally suited for light towing and loads, these units are fully adjustable using the heavy duty U-bolts included in the kit using simple hand tools. If your tow and haul needs change, simply adjust the heavy duty U-bolts to suit the new load requirements. Once installed and adjusted you are free to haul or tow with greater control and stability. Manufactured with heat treated ASTM 5160 alloy spring steel in our California based facility, these units are rated up to 500 lb. level load carrying capacity. They are a great cost effective spring solution and can be adjusted independently for uneven side to side loads.

Additional Fitment Information:

Vehicle	Sub Model
2013 - Toyota Tacoma	Base

Brand	Hellwig
Part #	550
Condition	New
Warehouse	C

2013 Toyota Tacoma Leaf Helper Spring Hellwig

Up To 2000 lbs. Level Load Capacity For Air Bags On Lifted Vehicles Using Non-Tapered Lift Block~Use PN[4822] Spacer For A 2 in. Rear Lift And~PN[4824] Spacer For A 4 in. Rear Lift
EZ-990 Helper Spring Kit for 05-13 Tacoma Pickup 4wd/pre-runner except TRD
EZ-990 Helper Spring Kit
Product Attributes:
- Mounting Hardware Included: No
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Adjustable Length: Yes
Features:
- Adjusted Independently For Uneven Side To Side Loads
- Mount Under Factory Axle U-Bolt Plates
- Complete Bolt On Installation
- Variable Rate Leaves Do Not Effect Ride When Unloaded
- Adds New Life To Old Springs
- Reduces Body Roll
- High Quality Spring Steel Leaves
- Limited Lifetime Warranty
Hellwig's medium-duty EZ-990 Helper Springs pack a lot of capability in every box. Packaged complete with the same heavy duty powder coated and plated components, hardware and installation instructions as our heavy duty helper spring products, these kits are designed for the vehicles that need lighter assistance in carrying a load. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. Ideally suited for light towing and loads, these units are fully adjustable using the heavy duty U-bolts included in the kit using simple hand tools. If your tow and haul needs change, simply adjust the heavy duty U-bolts to suit the new load requirements. Once installed and adjusted you are free to haul or tow with greater control and stability. Manufactured with heat treated ASTM 5160 alloy spring steel in our California based facility, these units are rated up to 2,000 lb. level load carrying capacity. They are a great cost effective spring solution and can be adjusted independently for uneven side to side loads.